MoDOT drawing standards are provided here for use by consultants in creating a MicroStation Drawing environment that exactly matches the environment used internally at MoDOT.  These standards, when used in conjunction with MicroStation ensure that drawings provided to MoDOT meet our requirements. As of September 2010, MoDOT's production release of MicroStation/GEOPAK are 08.11.05.17 and 08.11.05.39 respectively.  This configuration is available for download via the link provided below. The files contained here are provided in one of three formats:  *.pdf files are Adobe Acrobat documents,  *.dgn files are MicroStation Drawings, and *.zip are zip compressed files that will need to be decompressed to use.  It is suggested you start with first reading the documents contained in the "information on MoDOT drafting standards" link listed below.  . These files outline how to use the associated standards.  A link to "Full MoDOT Configuration provides all the department MicroStation standards in a single .zip file for ease of download.  Users that are using the previous release of the MoDOT MicroStation or GEOPAK Standards are encouraged to download the full configuration to replace their older files.  Submit the following email if you would like to be notified via email about future updates to MoDOT's drafting standards and setup. Subscribe to MoDOT's Drafting Standards Update   Specifications of Computer Deliverable Contract Plans Information on MoDOT drafting standards and setup    MicroStation V8i (08.11.05.17) / GEOPAK V8i (08.11.05.39) - (Updated 09/09/2010)   GEOPAK Help The documents are provided in Acrobat Reader format. Free Acrobat Reader download